Business Grade Wireless
If you are in a restricted area for data communications or your business is seeking a secondary diverse path solution to support uptimes of 99.9% or greater, than Via IP’s Business Grade Wireless is the product suitable for you.
Business Grade Wireless is a dedicated point to point, licensed or unlicensed, wireless service directly connecting your office building to our closest POP. This dedicated link cannot be interfered and is not shared by other users and as such provides extremely high availability. When combined with a fixed service such as B.E.N., Business Grade Wireless can be used to automatically failover in real time for unprecedented uptime.
Via IP’s Business Grade Wireless is a full duplex, symmetrical service that scales from 1/1Mbps to 1/1Gbps and has full QOS support for VoIP and Video.
Lets Get Technical
Overview
Business Grade Wireless Access service connects a Customer’s site to the Via IP Network via an Ethernet interface, using a Symmetrical, full duplex business grade wireless last mile circuit.
The services can be provisioned at speeds ranging from 1Mbps/1Mbps through to 1Gbps/1Gbos, although the maximum bandwidth available to the Customer may be 5% less than the subscribe bandwidth due to the overheads for Ethernet transport.
Multiple VLANs can be supported on a single Access service and dedicated bandwidth policing is available per VLAN. Accordingly, only one or two VLANs are recommended per service.
Customer’s frames are transported over the Customers circuit the Via IP Network, which then delivers the traffic to the Core Network and onto its destination.
Contention on the last mile transmission service ranges from undisclosed for the unlicensed services to 1:1 for licensed frequency services.
End to end Quality of Service is available on all Business Grade Wireless Access services.
Business grade wireless access technical specifications and features
|
Service Speeds |
1Mbps/1Mbps – 1Gbps/1Gbps |
|
Duplex |
Full Duplex / Symmetrical |
|
Maximum Number of VLANs per Access Service |
5 |
|
Maximum Frame Size (MTU) |
1500 bytes |
|
Quality of Service |
End to end, DSCP and RSVP |
|
Coverage |
Brisbane, Sydney, Melbourne, Perth |
|
Physical Interface |
10/100/1000 Ethernet |
|
Interface Configuration |
Default: Auto-Negotiate |
|
Internet Protocol |
IPv4 / IPv6 Ready |
|
IP Address Options |
Customer defined |
|
Technical Support |
24x7 via national number 1300 NET OPS |
|
Diverse Path Redundancy |
Available upon request |
|
Packet Loss |
Maximum packet loss of less than 0.3% |
|
Jitter |
1ms maximum jitter |
|
Latency RTT |
Less than 80ms from CPE to PE RTT |
